How to disassemble a CCKW composite bed pt 2

Topics relating to the chassis, cab, body, or cargo/dump bed.

How to disassemble a CCKW composite bed pt 2

Postby deadline » Fri Dec 28, 2007 11:06 pm

The saga continues...

Basically there are 9/16ths and 1/2in bolts attaching the side to teh support beams that run across the bed. Take them out. There are also some flanges that are attached to the side and go further under the bed, about mid way. They have two bolts. Its all pretty straightforward.

After the snow and mud clear up I'll take off the front panel and the wood.
Here is the side off. Notice the attach points sticking out from under the bed. There is also an L channel that (in my case is rusted away) that support the outermost board.
side.jpg (67.48 KiB) Viewed 1799 times
Site Admin
Posts: 52
Joined: Wed Oct 10, 2007 1:16 am

Return to Chassis/Body/Cargo Bed