Winch lever lock plate

Topics relating to the Power Take Off or Winches installed on GMC CCKWs.

Winch lever lock plate

Postby motto » Fri May 10, 2013 7:38 am

Hi Paul.

I asked a question on the G503 forum about whether the hinged winch PTO lever lock was fitted right from the start of production or was a modification during the production run.

Nobody has responded so I thought I would ask you. The plate I'm referring to is attached to the floor alongside the lever slot and has a hinged part with a cut-out that locks the lever in neutral


Re: Winch lever lock plate

Postby pfarber » Wed Jul 03, 2013 8:29 pm

Originally there were no lock plates.

And of course I can prove it with a photo 8)

tm1017.jpg (150.54 KiB) Viewed 9551 times

This is from the Tankograd Dump, Gun and Bomb service truck book. I could dig out the specific TM10s.. but this should suffice. Note the early round levers in the open cab. The late 42 and early 43 TM10s do list contract information so you should be able to get an idea how 'early' early is.
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
Motor Sergeant
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Return to PTO/Winches