Hear no knowledge, have no knowledge

He's the modern version of Joe Dope! I respectfully and solemnly dedicate this forum to the great one. These posts are moderated.. so if you want to post, they will not immediately appear.

Hear no knowledge, have no knowledge

Postby pfarber » Tue May 03, 2016 9:47 am

Yet another gem from my buddy on the site the still lets him blather aimlessly

Re: Inspecting ball bearings?

Postby Ben Dover » Mon Jul 06, 2015 5:11 am
It's called experience, no pits, no noise, no side play in the races on ball bearings. One thing to realize is that transfers are noisy, some noise is determined by the condition of the bearings, it's up to you while the gear box is all apart to consider how new you want your truck to perform and sound.

Transfer case noise is 100% the straight cut gears meshing. If you can hear the bearings then things are in bad shape.. and bad bearings in no way shape or form sound like gears meshing. My M35a2 transfer case whine was louder than the unmuffeled diesel engine (and Bend me Overs incoherent babbeling... if you can imagine a noise that loud ).

Keep posting Have-er of little knowldge.. i need a good laugh.
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2835
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Return to Things Dover/Gopan/WWII Truck is wrong about

cron