Any interest in G506 shields/baffles?

Topics relating to the chassis, cab, body, or cargo/dump bed.

Any interest in G506 shields/baffles?

Postby pfarber » Wed Apr 23, 2014 5:52 pm

My truck seems to have the hard to find left and right splash shields and the front cross member (lower) shield (not the one that goes from the radiator support to brush guard, the one that attaches to the frame).

Any (even casual) interest??
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Any interest in G506 shields/baffles?

Postby pfarber » Thu Apr 24, 2014 11:12 am

This is all I could find of the 'Baffle' in the SNL

baffle.JPG
baffle.JPG (47.75 KiB) Viewed 6779 times


There is no real picture of the lower engine shields/baffles.

The Part number for the above is

Z Baffle, CV-3661510 Group 0502 (the parts diagram in the SNL refers to Group 0501 but that is incorrect)

baffle1.JPG
baffle1.JPG (63.77 KiB) Viewed 6779 times
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Any interest in G506 shields/baffles?

Postby retro-roco » Thu Apr 24, 2014 3:05 pm

What kind of interest are you seeking? I have one, but am missing the other. Are you selling, or thinking about re-popping?

Here's the one I have...

P1003072.jpg
P1003072.jpg (223.99 KiB) Viewed 3747 times
Last edited by retro-roco on Fri Apr 09, 2021 8:53 am, edited 1 time in total.
retro-roco
Motor Sergeant
 
Posts: 275
Joined: Mon Nov 19, 2007 9:30 am

Re: Any interest in G506 shields/baffles?

Postby pfarber » Fri Apr 25, 2014 9:49 pm

Here is the 'family' of baffles. There are two others, the are small triangle shaped on the radiator support cross member. I have a photo but my camera batteries died... will post them after a charge.

Yes, the lower front radiator baffle is mangled, but I have another one on another truck.

rs_DSCN0335.jpg
rs_DSCN0335.jpg (71.71 KiB) Viewed 6775 times


They are in their proper relative positions. The CCKW also has baffles, but not like these (as far as I can tell).
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Any interest in G506 shields/baffles?

Postby pfarber » Sat May 03, 2014 2:00 pm

This was posted on Jim Carters web site:

http://www.oldchevytrucks.com/blog/inde ... l-1934-46/

pans.PNG
pans.PNG (206.69 KiB) Viewed 6773 times


The ones in the photos are actually reversed. The 'straight' side goes toward the motor, the 'jagged' side mounts to the frame. Also the squared off portion is the rear, not the front.

The large hole in my photo on the drivers side is for the exhaust manifold to pass through. The passenger side holes are still bot of a mystery. One hole is for the draft tube. Don't know what the other hole could be for.
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Any interest in G506 shields/baffles?

Postby retro-roco » Fri Apr 09, 2021 8:56 am

Paul,

Please let me know if you ever decide to sell these, particularly the driver side.
retro-roco
Motor Sergeant
 
Posts: 275
Joined: Mon Nov 19, 2007 9:30 am

Re: Any interest in G506 shields/baffles?

Postby pfarber » Sat Apr 10, 2021 11:42 am

I am planning on parting out my last truck. Sold my CCKW and parts G506 to prepare to move.. the Wooden Ben Hur and G506 (with all the hard to find parts) is next.

Expect to see them listed here and on Facebook G506 group in the next week.

Be prepared to be shocked at the prices.
I got a Bun Hur
I got a Chevy and another Chevy.
I got a CoonHound and a Mountain Cur
RIP Yeager 1/3/2019
RIP TJ 3/25/2014
RIP Sugar Bear 8/29/2014
RIP Shilo 4/10/2015
RIP Yuki 2/19/2017
User avatar
pfarber
Motor Sergeant
 
Posts: 2836
Joined: Wed Oct 10, 2007 2:45 am
Location: The Internet

Re: Any interest in G506 shields/baffles?

Postby retro-roco » Sat Apr 10, 2021 10:31 pm

Thanks for the warning. I'll be watching for them.
retro-roco
Motor Sergeant
 
Posts: 275
Joined: Mon Nov 19, 2007 9:30 am

Re: Any interest in G506 shields/baffles?

Postby retro-roco » Fri Dec 03, 2021 3:02 pm

any updates on the splash guards?
retro-roco
Motor Sergeant
 
Posts: 275
Joined: Mon Nov 19, 2007 9:30 am


Return to Chassis/Body/Cargo Bed

cron